Remove Urethane Adhesive from Hardwood Floors: In 5 Effective Ways

Hardwood floors are so common in a house where an aesthetic environment is the first priority. Apart from providing a vintage look to the floor, it has many beneficial factors as well. And these hardwood floors are greatly affected by cured urethane adhesive for their immense adhesion power. It might occur from any kind of accident when you work with the adhesive.

Urethane adhesive has versatile usage and their adhesion is used to fix multiple things by many DIYers. Besides its benefits, people are concerned to know how to remove urethane adhesive from hardwood floors adopting the easiest possible way. As an adhesive, urethane sometimes offers challenging situations. Many people fail to recover the hardwood floor from this adhesive and leave terrible marks and gauges on it.

Therefore, it’s important to take this task seriously for the sake of the beauty of your hardwood floor.

How to Remove Urethane Adhesive from Hardwood Floors

5 Ways to Dissolve Urethane Adhesive:

It’s actually tough to remove urethane adhesive from a hardwood floor. The situation gets worse when the urethane adhesive gets cured. It’s very tough to remove the stubborn adhesive from the hardwood floor then. Removing it might cost a lot sometimes. It destroys the floor or leaves gauges if you try an unwanted process to remove the adhesive.

Therefore, you need to be generous so your floor does not get affected badly and follow our guide for dissolving urethane adhesive from a hardwood floor.

Urethane Adhesive Remover:

A good and renowned urethane adhesive remover can take a huge part in cleaning adhesive from the floor. There are many removers for urethane adhesive available in the market. From Sentinel 922 Urethane Adhesive Remover to Ultrabond Urethane Cleaner, these products are effective to wipe out the stain of urethane adhesive.

Most of the quality removers are odorless and don’t require much to get right in their job. Some of the removers are so great that they do not leave residue on the floor to make more hassle.

Mineral Spirits:

Mineral spirits have immense use in removing urethane adhesion. Though many doubt the idea of using mineral spirits, this is quite a satisfying idea so far. Also, many professionals take the idea into their account to get rid of the stubbornness of the urethane adhesion. This organic solvent amalgamates with the adhesion and helps in loosening the bond of the adhesive.

Besides, the inexpensiveness of this solvent makes it available. Also, the tackling capability of this petroleum distillate is really appreciable.

Methylene Chloride:

Methylene chloride is a very strong cleaner in comparison to other cleaners or removers. It is mostly used in industries where the uses of different kinds of adhesives are common. This substance comes in transparent color and requires awareness while using because it carries harmful odor and additives in it. Wearing a goggle, mask, and hand gloves can save you from occurring any kind of accident.

From degreasing to removing tough stains, this methylene chloride works magically in any weather and tough situations. This substance is also known as dichloromethane widely.


Acetone is another organic solvent that comes with powerful influences. This solvent is no lesser than methylene chloride. Its organic formula works hilariously on the hardwood floor where the urethane adhesion is resting. This cleaner is also largely used in manufactures, industries, and plants where deep cleaning or degreasing is a regular job.

But it can be used at home as well in jobs like removing clingy urethane adhesive. But using this solvent in cleaning every product can affect it badly. So, you need to be specific with your product.

Denatured Alcohol:

Denatured alcohol is a solvent that can be used in cleaning the adhesion of urethane to some extent. It carries denaturants and toxic chemicals. These chemicals make the alcohol inconsumable. However, many people use denatured alcohol as an alternative to acetone. This solvent is also named methylated spirits.

Because of its less powerfulness, it is safe to use this substance. But this solvent guarantees to work better on adhesions.

Goo Gone Pro-Power Spray Gel:

It’s a very powerful spray that pulls out the rough and tough urethane adhesive from your lovely hardwood floor. This spray gel is also very convenient to use. It’s very much safe from the solvents that we’ve already talked about above. Besides clearing away the adhesion, this spray gel is able to clear residue that remains on the floor.

However, the last remaining residue can be cleared away by using any quality hardwood floor cleaner. Also, it’s inexpensive and easy to apply in the particular place where the spray gel is required. It does not smell terribly like other expensive urethane adhesive remover and knows its purpose very well.

 How to Remove Urethane Adhesive from Hardwood Floor: 7 Step Process :

Now that we know about the easiest ways of removing urethane adhesive from hardwood floors, it’s time to apply any of those ways and get the most effective result. And for this satisfying result, follow the below-written steps carefully.

Step 1: Collect Your Materials:

Firstly, the most important thing is to go to the nearby hardware store and collect your important materials like urethane adhesive remover, spray gel, or the solvents that are stated above. Apart from the remover or cleaner, for the job of cleaning urethane adhesive from your hardwood floor, you’ll be required the following materials,

  1. Clean rag
  2. Scraper or Putty Knife
  3. Warm water
  4. Hardwood floor cleaner

Step 2: Pour the Solvent:

Later on, you need to pour the solvent taking a limited amount on the specific space where the urethane adhesive is lying. Make sure you are not overpowering the solvent because it will affect the spaces around the adhesive. Also, take special care while doing the job so it does not spill anywhere.

However, once you pour the solvent or cleaner, make sure it covers all the places where the tough adhesive is resting.

Step 3: Let the Cleaner Rest for Some Time:

After the spreading of the cleaner, you need to let the dry adhesive soak it for some time. Give it at least 15-20 minutes to soak. Within this time, the adhesive will start to lose its strong bonds and the molecules will get relieved from each other. Thus, the particles of the urethane adhesive will be softened by the reaction of the cleaner come out from the surface.

Step 4: Wipe out the Adhesive:

Wipe the adhesive with a rag

After 15-20 minutes, take a clean rag and clean the space with it. The loosened particles of the urethane adhesive will come out in the rag. And the whole space will look even, just like before. But in many cases, the stubbornness of the urethane adhesive cannot be effaced this easily. Therefore, you might need to adopt the following steps as well.

Step 5: Repeat the Whole Process with a Putty knife or Flat Scraper:

Use a putty knife

The next job is to do the whole process again. Pour the cleaner on the particular spot properly and let it soak for 15-20 minutes. Then wipe out the loosened particles of adhesive. Now to get a rapid result, use a putty knife or a flat scraper.

Gently rub the adhesive so it does not affect the surface beneath it. The rubbing will help the sticky adhesive come out fast.

Step 6: Clean the Space:

wipe the space with a clean rag and warm water for the job

After the rubbing with the flat scraper, floor scraper, or putty knife, you need to wipe the space. Take a clean rag and warm water for the job. Soak the rag into the warm water and wipe the space gently. It will help to pull out the adhesive cleanly.

Step 7: Use Hardwood Floor Cleaner:

Use Hardwood Floor Cleaner

The next step is to clean the residue that remains on the surface after applying all the processes on the urethane adhesive. Any renowned hardwood floor cleaner will make the spot more even and better looking. It will also help to reduce the scratches mark that might happen because of the conducting of the putty knife or scrapper.

Therefore, clean your hardwood floor with a cleaner for a greater result and pack your job with it as well.


Question: Can I use a propane torch to remove urethane adhesive?

Answer: Removing urethane adhesive is challenging for sure and after its cure, it becomes more challenging. Using a propane torch is a very good option as it softens the bonding of the adhesion to a large extent. Besides, conducting a propane torch is much more promising and less time-consuming. But to use the propane torch, you need to make sure that the surface is strong enough to get along with the heat of it.

If you want to conduct the propane torch on a concrete or metal floor, this will work promisingly. It might also work on the hardwood floor to some range, but it’s better if you use a heat gun or a hairdryer instead of a propane torch. A heat gun is promising in affecting the strong bond of urethane adhesive more usefully.

Question: How to remove residue from hardwood floors?

Answer: It happens in many cases that after trying hard to remove a strong adhesive, there remains a very small amount of the adhesive. This small amount of the substance is a residue that needs to be removed as well to get an even surface.

When the bigger part of the adhesive is removed, you need to adopt some great cleaner for your hardwood floor. Spread the cleaner on the floor properly and clean the surface with the help of a mop. Make sure you are doing a deep cleaning on the spot where there is residue. A quality cleaner for hardwood floors comes with nice a fragrance.

Last Updated on August 19, 2021 by Rogers Weber

[As an Amazon Associate I earn from qualifying purchases.]

Add a Comment

Your email address will not be published.